Products

Fire Extinguishers

Fire Protection Alliance can supply, service, maintain and commission all makes and models of fire extinguishers that you could require. We offer first class service from our offices in Aberdeen and Motherwell from where we are providing quality extinguishers available at a highly competitive cost.

All the extinguishers that we supply meet with the BS EN3 standards.

Maintenance

All fire extinguishers in the United Kingdom are required to be maintained to BS5306 which is the industry standard for fire extinguisher maintenance.

It is incumbent upon the owners of fire extinguishers in the United Kingdom that they are serviced/maintained annually by a certificated fire extinguisher engineer, and, that your fire extinguishers and other fire fighting equipment comply with British Standard 5306.

Your annual service carried out by one of our certificated engineers will ensure that your extinguishers and other fire fighting equipment is continually maintained to comply with the current requirements of BS5306.

Extinguisher Types

Water
Co2
AFFF Foam
Dry Powder
Wet Chemical

Fire Alarms

It is a requirement that will affect almost all commercial and industrial properties and who will require a fire alarm detection system to be supplied, installed and commissioned to ensure an acceptable level of fire protection to life and/or property.

Fire Protection Alliance Ltd can supply and install a Fire Alarm System to meet with the requirements of BS 5839 to suit your individual property and business needs, and we will be pleased to carry out a free survey of your premises and submit a fully costed quotation for your consideration.

Hard wire and radio fire alarm systems are available to suit all needs and requirements of various types of buildings and we will advise you accordingly to suit your individual needs.

When a system has been installed, tested and commissioned by our certificated engineers, we shall supply a commissioning certificate, fire alarm log book in which all events/maintenance visits etc are to be noted.

A Fire Alarm diagram Zonal Chart will be supplied to the client upon completion of an installation.

When handed over to the client all fire alarm systems require to be regularly tested and serviced to ensure compliance with BS5839 as follows:

Daily - Keep a daily record of any faults and report them.

Weekly – A weekly test of the fire alarm is required by activating a different call point or detector to check the system. The test and results of the test must be recorded in the system logbook.

Quarterly - Check the logbook, operate a call point, simulate faults to check the control panel, visually check for any structural alterations, and log all details.

Annually - Carry out normal quarterly testing and also test every detector on site and ensure all cable fittings are secure.

Fire Protection Alliance Ltd currently,supply, install, commission and maintain all types of addressable and conventional fire-alarm systems, we also supply and install wireless fire alarm systems allowing us to offer our clients a reliable fire alarm system to suit all needs and type of building all in compliance with BS 5839.

Our engineers are fully trained and certificated by the FIA The Fire Industry Association and we are available on a 24 hour call out service via our office telephone number which is manned 24 hours per day, every day of the year.

Emergency Lighting

Emergency lighting is required to illuminate in the event of the main power supply failing.

In the event of a mains power failure occurring, the emergency lighting fitments will provide lighting for a minimum period of three hours.

The emergency lighting will also assist in identifying escape routes if directional arrows are used and fitted to the emergency lighting units.

Fire Protection Alliance Ltd can supply, install and maintain your Emergency Lighting for you, we normally carry out the maintenance at the same time as maintaining your fire alarm system thereby cutting costs by coupling the service visit.

Our trained and certified test engineers will carry out your Emergency Light testing as in accordance with BS5266 requirements, these services should be carried out on a 6 monthly basis.

Fire and Safety Signs

It is a legal requirement that all new health and safety signs must now show the appropriate symbol and where necessary supporting descriptive text.

All hazards must be highlighted with a safety sign if they cannot be controlled by other means.

The location of all escape routes must be clearly signed.

Fire Extinguishers/Hose Reels must be clearly identified as to the suitability and use of the equipment.

Employers must provide employees with training regarding the interpretation of all safety signs.

Signs are available in various sizes and can be made of the following materials:

Rigid Plastic

Self Adhesive Vinyl

Contra vision

Photoluminescent Plastic

Photoluminescent Self Adhesive

One Touch Braille

We also provide a range of prestige signs that have been developed for use in areas that are seeking a higher quality than the standard signage.

These signs are available in a variety of finishes as listed below:

Brushed Stainless.

Polished Stainless.

Satin Aluminium.

Polished Brass.

Our experienced and fully qualified fire safety engineers will be happy to carry out a survey of your premises to ascertain and advice on signage you may require.

We can also supply and install any other items you may require relating to fire and emergency equipment such as Fire Blankets, Extinguisher Cabinets, Fire Extinguisher / Hose Reel Covers, Fire Points / Extinguisher Stands, Alarm Bells, Fire Buckets, First Aid Kits, Hose Reels and Accessories.

CCTV Systems

CCTV is more than just a deterrent, CCTV provides continuous monitoring and surveillance where and when you want or need it, the recorded images can be used as evidence as and when needed.

CCTV has become a necessary, important and powerful business tool.

Combining CCTV with other security systems it becomes a formidable tool in the fight against crime with the CCTV monitoring of your business providing a visual aid to the securing your business and increasing the safety of your property, and, employees.

CCTV has become the biggest single deterrent to intruders, but it is vital that you choose the system that is right for you, your business needs, and the security of your employees.

It is vitally important that you must choose the correct system that meets the needs of your property and is designed to the size and layout of your premises covering both the internal and external areas of your property.

It is important that the system is professionally and competently designed, installed, maintained by a professional company, Fire Protection Alliance can provide your company with the service to meet these vital requirements.

We will help you to decide what your performance priorities are for your CCTV system including coverage, image quality and alarm response.

The effectiveness of any CCTV security solution may be diminished unless the system has been professionally designed for the maximum performance of the cameras which should then be installed by fully trained engineers.

Fire Protection Alliance Ltd can offer you a range of CCTV systems from basic CCTV observation systems, to complex security camera systems for business security.

Digital CCTV provides continual recording onto hard drives, higher image quality, and remote viewing of images via the Internet from anywhere in the world.

Fire Protection Alliance Ltd provides a service from supply right through to full maintenance packages and we would be pleased to assist you in any way we can.

Intruder Alarm System

An Intruder Alarm is designed as a deterrent to someone considering intruding into your property.

A stand alone system is designed to detect and react to an intrusion at the earliest possible moment and provide an audible localised alarm, right up to PC based integrated systems.

Fire Protection Alliance Ltd can arrange to design, install and maintain your system allowing you a choice of detection and monitoring options for your security alarm.

We can offer a wide choice of monitoring facilities for your security system.

We can provide connection to a monitoring centre which operates in a totally secure area utilising the very latest in monitoring technology using proven, reliable signalling methods for remote monitoring of your system.

An Intruder Alarm System has the flexibility to handle modern day requirements and can be designed to meet your individual requirements and has the flexibility to include a wide choice of security products within the single system.

Intruder alarms are designed to specific detail, installed neatly with minimum disruption and supported by our 24 hour service and maintenance department thereby ensuring your intruder alarm system remains as reliable and effective as possible.

We can install wireless systems and are also able to extend an existing hardwired system with wireless equipment to inaccessible areas such as garages and out-buildings.

Wireless systems are particularly useful where wires cannot be easily concealed and the least possible disturbance to the infrastructure of the property is necessary.

No salesperson will call we only utilise experienced surveyors who will contact you to arrange a mutually convenient time to carry out a security audit on your property before recommending the alarm system that best suit your needs..

Access Control Systems

Fire Protection Alliance Ltd supply, install and maintain Access Control systems which can be a stand alone unit right up to a system that can be integrated into a variety of Building Management and Time and Attendance systems to provide a single point of control.

Access control provides security by giving flexible control over who, when and where authorised users are permitted to enter in a property or site.

The systems we supply, install and maintain will keep your sites, properties, your staff and assets secure by allowing access to areas to only those authorised.

Systems available range from one door systems to a system that can control hundreds of doors and across multiple sites/locations if required via a centralised central control.

If you have remote unmanned properties that require access control, this can be achieved by stand alone, or remotely controlled from your main office.

Reporting capability varies from type to type and you can have all actions reported/recorded, you can allow and deny access to various areas and various users, some systems can be utilised by being linked to a time and attendance system.

Access Control Systems are available in a variety of operational types, ranging from systems that operate by code entry, card entry, speech entry, card and card and code entry.

We offer a full maintenance package for all systems we install, and, any systems installed by others.

VESDA (Very Early Smoke Detection System)

A VESDA (Very Early Smoke Detection System) system is a fire detection system that does not operate with standard smoke detectors, a VESDA system uses an active suction system to draw in the air from around a series of pipe runs that are fixed to the ceiling thereby drawing in and sampling the air for any smoke presence through sampling holes at various points on the pipework.

The VESDA control panel has a fan and air filter installed. When functional, the fan draws air through the pipe sample points and back to the control panel where it is monitored for smoke detection which will raise the alarm if smoke is detected.

VESDA systems are usually installed in computer rooms or high level areas where getting access to normal smoke detectors would be difficult and in areas where a proactive detection system giving an earlier warning of smoke being present is required.

Fire Protection Alliance Ltd can supply and install a VESDA System to meet with the requirements of BS 5839 to suit your individual property and business needs, and we will be pleased to carry out a free survey of your premises and submit a fully costed quotation for your consideration.

When handed over to the client all fire alarm systems require to be regularly tested and serviced to ensure compliance with BS5839 as follows:

Daily - Keep a daily record of any faults and report them.

Biannually – Power supply to be checked along with the pipe network and air flow

Annually – Perform system integrity smoke test

Every 2 years – Clean all sampling points

Every 2-5 Years ( dependant on building conditions)- replace panel filter

Fire Protection Alliance Ltd currently maintain Vesda systems allowing us to offer our clients a reliable fire alarm system to suit all needs and types of building all in compliance with BS 5839.